Renishaw OTS Probe Orientation

[Vsmfg]

Hi Guys,

I was surprised to find out that Haas do not ship Renishaw programing manual with the machine.
I've done plenty of probing before on Fanuc machines.
I need to move the OTS tool probe to the left side of the table and I need to change the orientation so the probe is along the Y axis.
Now , I know I need to change a setting in the OTS setting macro. I just don;t know which setting to change since there is no manual.

Has anyone done this on a Haas machine?

Thank you

Similar Threads:

• Need Help!- Renishaw probe
• ***Renishaw Probe***
• renishaw probe tip
• Newbie- Renishaw probe
• Mp7 Renishaw probe

[pdoherty]

I think that what you are proposing is only possible with a wired probe.
We started to do the same thing on a wireless probe machine and realized that anything but the factory orientation points the tool probe IR transciever away from the stationary tranciever.

I can email you the Renishaw Manual if you PM me.

[WallyL7]

Contact Renishaw. They are more than happy to send the manuals to you. Rich Foley is who I've dealt with and he is awesome. Can probably steer you in the right direction.

[haastec]

Contact Renishaw. They are more than happy to send the manuals to you. Rich Foley is who I've dealt with and he is awesome. Can probably steer you in the right direction.

+1

I have always found Renishaw customer service to be very helpful. You should even be able to download the manuals straight from their website.

Good luck!

[KenFoulks]

Contact Renishaw. Rich Foley is awesome.

+2
Both are correct. I called Rich, he provided this document.

[Vsmfg]

Thank you guys!

I've got the programming manual for the OTS.

If you want to move the OTS and change orientation - you need to
change
#[ #161 + 36 ]= 2.
in program O9376

accordingly . In my case I want the probe along the Y axis, stylis facing the operator. So the value will be =1.0