HAAS 603 NON-MONOTONOUS ALARM

[smcdonn]

I'm new to CNC's and am having some trouble with Bobcad posting some code. I'm getting the 603 alarm and I can't figure out why. I highlighted the code below that is problematic.




%
O13001 (M12X1.5 OIL FITTING)

(Machine Setup - 1 Turn Rough )
(TOOL #10 35 DEG. 1/64 FINISH TURNING )
N1 G40 G99 G20 G90
N2 T1010
N3 M42
N4 G50 S1500
N5 G96 S350 M03
N6 M08
N7 G00 X0.8946 Z0.1008
N8 G71 P9 Q20 I0.015 K0.005 U0.02 W0.01 D0.05 F0.005
N9 G00 X0.349 Z0.0908
N10 G01 Z-0.0092
N11 G01 X0.4598 Z-0.0646
N12 G03 X0.469 Z-0.0756 I-0.0117 K-0.0113
N13 G01 Z-0.4056
N14 G03 X0.46 Z-0.4166 I-0.0173 K0.0007
N15 G01 X0.349 Z-0.473
N16 G01 Z-0.5
N17 G01 X0.7045
N18 G03 X0.7266 Z-0.5046 I-0.0007 K-0.0173
N19 G01 X0.8746 Z-0.5784
N20 G01 X0.8946 Z-0.5684
N21 G40
N22 M09
N23 M01
N24 G00 X10. Z0.1008
N25 G00 Z5.

Similar Threads:

• Need Help!- 602 non-monotonous pq block in x alarm
• Need Help!- HAAS TL1 Post and Non-Monotonous Alarms
• Need Help!- NON MONOTONOUS?
• ALARM shuttle drawbar alarm haas
• non-monotonous alarm

[andre_77]

N19 G01 X0.8746 Z-0.5784
N20 G01 G40 X0.8946

[smcdonn]

So your saying to take the z move out of line 20?

[andre_77]

Try this code in graphical mode.