Hey Guys- We bought one in November. We machine experimental lab equipment and one-offs. We could not use the Haas successfully until the air pressure alarm was solved. The problem was that the machine shipped with a setting to check for a lube switch even though we didn't have one. It took three repairman to solve this. Now it seems to run okay, although we are adding our own lighting and coolant manifold.
MY QUESTION: What holders do people use for the four station automatic turret ATT 1 for 3/4 tools. Who do you use for the tool holders? In specific boring bars. We don't care for the HAAS holder, would like to purchase one that orientates the bar using a flat and a set screw, etc. Any suggestions?