Hello New Texas member lookimg for help

Results 1 to 5 of 5

Thread: Hello New Texas member lookimg for help

  1. #1
    Registered
    Join Date
    Nov 2014
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default Hello New Texas member lookimg for help

    Hello everyone I'm a new member on this forum but no stranger to forums. Im a US Army veteran turned educator full time, and a hand engraver on my free time here is my work Home I'm really interested in this wonderful world of cnc. I hope I'm in the right place, my end goal is to be able to make 1911 grips im both aluminum and wood and to be able to inlay some precious metals in the wood.
    was wondering if this community had anyone in the Texas area that would be willing to let me see thier machine and set up. I am completely new to this, I already checked with my local community college and no classes arw offered (frustrating) evrything is now geared to the oil field work. Thanks for any help. I need to find a cnc machine and software for dummies. was looking at the shapeoko 2. I'd rather hear from the community first.

    Thanks for the help

    Thanks everyone take care


    my work


    Saludos,
    Carlos
    Home

    Saludos,
    Carlos
    Home

    Similar Threads:


  2. #2
    Registered
    Join Date
    Jun 2015
    Location
    USA
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default Re: Hello New Texas member lookimg for help

    We build suppressors and rifles, all of our engraving is done on a taig mill with a 4th axis. These are rather inexpensive machines and do a nice job engraving. My advice is to go with something like the Dearmond DSLS4000 because it uses servo motors. This machine would fit the work envelope you need.



  3. #3
    Member gabedrummin's Avatar
    Join Date
    Aug 2008
    Location
    united sates
    Posts
    403
    Downloads
    0
    Uploads
    0

    Default Re: Hello New Texas member lookimg for help

    Were in Texas are you ?



  4. #4
    Registered
    Join Date
    Nov 2014
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default Re: Hello New Texas member lookimg for help

    Laredo

    Saludos,
    Carlos



  5. #5
    Registered
    Join Date
    Jun 2015
    Location
    USA
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default Re: Hello New Texas member lookimg for help

    Sorry, I'm in Ohio. Do some looking on youtube at the taig mills. This will be about as easy as you can get started in engraving. If I can help with anything just let me know.
    Joe



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Hello New Texas member lookimg for help

Hello New Texas member lookimg for help