| | |
My mill had three inductors connected to the drives. Looking at the servopack pdf they were in series with the motors.
They are 3mH 11A inductors.
Motors are:UJMED 60L[and 80M], these are Minertia J motors[yaskawa]
Drives are: CPCR MR 154
I mentioned the inductors when I last mailed Tero.
Will I need them with the Granite drives?
It depends what the minimum inductance requirements are for the drives, I always tend to include them if they are already fitted, so far without detrimental performance on the drives I use.
Al.
CNC, Mechatronics Integration and Custom Machine Design (Skype Avail).
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
Posting Permissions
| | |
LinkBack URL
About LinkBacks
