VSD-E Parallel = VSD-E USB

[ne_bun]

Hello Tero
By any chance can be VSD-E Parallel interface ported to an USB interface solution? (the rest from my point of view your devices looks perfect)

CNC USB controller

A.

[Xerxes]

Current solution is to control VSDEPI with USB step pulse source, such as Smoothstepper board.

However, also multiaxis motion capable direct USB interface to VSD drives are in development by us. More about this will be released later

[ne_bun]

this is a good news. Do you have an approximation date (eventually an cost)?

and an offline question. servo motor from your site. BL86-660. What are dimensions between the fixing holes?

thx,

A.

[ne_bun]

http://www.granitedevices.fi/assets/...ervomotors.pdf

[Xerxes]

The actual bus is RS485 and adapters for it will be relatively low cost. Prototype batch is already in production, so they will be available soon. However, it should be noted that it will take time before first CNC app starts supporting it. In the beginning its good for non-cnc industry applications.