Need Help! GDTool Torque Tuning Step Responce.


Results 1 to 2 of 2

Thread: GDTool Torque Tuning Step Responce.

  1. #1
    Registered
    Join Date
    Nov 2005
    Location
    USA
    Posts
    12
    Downloads
    0
    Uploads
    0

    Default GDTool Torque Tuning Step Responce.

    I'm using VSD-E drives to convert a Hurco KMB-1. Stock motors have been fitted with encoders as the tac gens are not used with this drive.
    The first round of torque tuning produced step response plots much like the tuning manual examples.

    Now I'm having trouble. All step gen plots are saw tooth wave forms only now and changing the gain settings dosen't seem to alter the wave forms at all other than height.

    Similar Threads:
    Attached Thumbnails Attached Thumbnails GDTool Torque Tuning Step Responce.-xaxisplot-pdf  


  2. #2
    Registered
    Join Date
    Nov 2005
    Location
    USA
    Posts
    12
    Downloads
    0
    Uploads
    0

    Default Re: GDTool Torque Tuning Step Responce.

    Quote Originally Posted by jtlapp View Post
    I'm using VSD-E drives to convert a Hurco KMB-1. Stock motors have been fitted with encoders as the tac gens are not used with this drive.
    The first round of torque tuning produced step response plots much like the tuning manual examples.

    Now I'm having trouble. All step gen plots are saw tooth wave forms only now and changing the gain settings dosen't seem to alter the wave forms at all other than height.


    Reflashing firmware has restored step gen plotting function. Will test further.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

GDTool Torque Tuning Step Responce.

GDTool Torque Tuning Step Responce.