| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Glass, Plastic and Stone Discuss machining Glass, Plastic and Stone here. |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
02-12-2008, 10:56 AM
| ||||
| ||||
Was having a clearout today and found some old parts I made (I always make more than I need) and before I bin them thought I'd post a piccy of them. I remember every bloody finicky mathematical problem with each and every one of them, but still feel a strange sense of loss at sticking em in the bin. Materials are various polymers (plastics) of differing refractive index. 
__________________ I love deadlines- I like the whooshing sound they make as they fly by.  |
|
#4
02-12-2008, 09:55 PM
| |||
| |||
| Yes, sometimes you just don't want to get rid of them. When I switched to CNC from doing everything on manual machines with jigs and fixtures I threw out three 45 gallon drums full of the old drill jigs and things. Sometimes I wish I had kept a few examples.
__________________ An open mind is a virtue...so long as all the common sense has not leaked out. |
|
#5
02-14-2008, 06:58 PM
| ||||
| ||||
| mkae paper weights out of them and sell them at the flea market LOL..geees if I had them I'd never get anywork done . in reality if there an art school around you I would donate them and get a tax break |
| Sponsored Links |
| |
|
#6
02-16-2008, 06:27 PM
| ||||
| ||||
@ Imacarrot- if you have a large optic I could use for inspection that would be great , These eyes arn't so young for small stuff  mike |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Nakamura Chucking Problem | JerryH | Machine Problems, Solutions , Wireless DNC, serial port | 1 | 08-03-2007 09:30 PM |
| I can't be the only one surely? *sniff* | ImanCarrot | Mechanical Calculations/Engineering Design | 10 | 05-08-2007 05:33 AM |
| spline chucking | reachraghu | Work Fixtures and Hold-Down Solutions | 7 | 04-09-2007 03:14 PM |
| Mach3 tuning (cuts small stuff fine, but is off on big stuff) | jdbaker | Mach Software (ArtSoft software) | 4 | 03-15-2007 11:30 AM |
| welding thick stuff to thin stuff - need advice | cross6 | Welding, Brazing, Soldering, Sealing | 5 | 01-13-2005 01:39 AM |
| | |
Linear Mode
