Needed software for Z.Bavelloni Alpa/100 CNC

[aealaa]

I need the software of the operating system for this machine and any document available for it.
Thanx

[DennisCNC]

You are asking for a almost imposible thing. If the OEM will not provide it no one else will. They use there own software. It's hard to get any help on Italian machines. But don't give up trying.

[ahmed]

Hi
I was working on this machine and I know a lot about it

[fractaledge3]

also I can help to produce post processing for that machine just send me any old file

[Kendon.]

Yes I can get you a compatible version of easycad/cam for the generation of your NUM controller, send me your email address and I'll zip it to you.
Kendon.

[helbokhary]

Originally Posted by Kendon. Yes I can get you a compatible version of easycad/cam for the generation of your NUM controller, send me your email address and I'll zip it to you. Kendon.

Please send if you can at hatemelbokhary@gmail.com

[double_d]

Originally Posted by ahmed Hi I was working on this machine and I know a lot about it

i am sort of new to cnc stuff had a little dabble 10 years ago
and thought this stuff is boring id rather cut glass by hand
now i am on it again but want to learn as much as i can
i would like to know a few things right now
about bavelloni alpa 315 if you know
mainly some MDI things
like how to pick a tool and things like that

daniel d

[bavtec]

hi all if you need some software or manual or technical question for bavelloni machine i can help you
!!!!normaly your local bavelloni distributor must have to help you....!!!!!!!
see you later
bav tec

[Celsius]

Hi Bavtec, hi everyone!

We run a Bav Alpa 315 / 4 and the PC broke down, we had to replace it. I now tried to install the software (01/2002) we have on the new XP PC (the dongle is pluged in the paralell port) but it does not work. When I start the setup, I immideatelly receive an error message saying "ERROR 19/61 Enable key missing". What can be the problem. Do I need a new software version or dongle?? I have contacted the local Bav dealer but have not received any anser yet.

I appriciate any help or hint.

Greetings, Chris

[NevNavi]

Originally Posted by Celsius Hi Bavtec, hi everyone! We run a Bav Alpa 315 / 4 and the PC broke down, we had to replace it. I now tried to install the software (01/2002) we have on the new XP PC (the dongle is pluged in the paralell port) but it does not work. When I start the setup, I immideatelly receive an error message saying "ERROR 19/61 Enable key missing". What can be the problem. Do I need a new software version or dongle?? I have contacted the local Bav dealer but have not received any anser yet. I appriciate any help or hint. Greetings, Chris

I have this same isuue with a Colibri 200 machine, is there any update or patch to repair it?

[masrawy]

Originally Posted by Kendon. Yes I can get you a compatible version of easycad/cam for the generation of your NUM controller, send me your email address and I'll zip it to you. Kendon.

hello kendon thank you for your help please send me your compatible version of easycad/cam our email is dodowagona@yahoo.com thank you a lot
we have alpa 320/4