Intermac Master Bevel

[Glass]

Hi,

I operate an Intermac master bevel for glass and im having problems running a program! Everything was working fine and then during a cycle the machine stopped for no reason...i then made the machine set down the tool that was in the spindle at the time and then reset the axis.

Now the machine wont run a program. It will do everything else fine (i.e - reset axis, spindle cycle, manually move etc) but just wont run a program. I have checked everything and rebooted the machine a few times but still nothing!

Anyboby have any similar experiences or be able to help?

Many thanks!

[snofy25]

Hi,

I operate an Intermac master bevel for glass and im having problems running a program! Everything was working fine and then during a cycle the machine stopped for no reason...i then made the machine set down the tool that was in the spindle at the time and then reset the axis.

Now the machine wont run a program. It will do everything else fine (i.e - reset axis, spindle cycle, manually move etc) but just wont run a program. I have checked everything and rebooted the machine a few times but still nothing!

Anyboby have any similar experiences or be able to help?

Many thanks!

Hi, i work 6 years with an master bevel and i now this problem. do you spek german ??? ican tell you about this problem. snofy25@web.de

[snofy25]

snofy25@web.de

[Glass]

Can anyone help??