| | |
i work with a breton nc 350.my problem is findig the rubber seals that go on the vacuume pods. any help would be helpful.
Last edited by pitts007; 07-14-2005 at 12:57 PM. Reason: spelling
Try these guys. http://www.allstaradhesives.com/
Gerry
Mach3 2010 Screenset
http://home.comcast.net/~cncwoodworker/2010.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Posting Permissions
| | |
LinkBack URL
About LinkBacks
