I wrote my own GibbsCam 'Post Haste' template for the big Acroloc series 100 machines with Fanuc 6M controllers by trial & error over the past year.
The Acroloc 100 requires special handling of the tool change code so
just a std 6M post will not even come close to working.
This Poste Haste template has been used extensively with both
2~1/2D programs and on 3D counturing & Lace work
(Iv'e done several large thermoforming molds using it, as well as
production piece work with v-good results. - Gibbs Rules !!
There is a probability that this template could also work for other CAM
software that uses the Poste Haste Post-processor.
Email is you want one (No liabilities please. Use at your own risk).