I figured out why I can't wrap/unwrap geometry.
I had 5axis vertical mill selected for my MDD. It looks like you can only wrap using a 4axis machine. Even 3 axis doesn't work.
i was wondering why it is not always possible to wrap/unwrap geometry.
What are the rules and limitations
I figured out why I can't wrap/unwrap geometry.
I had 5axis vertical mill selected for my MDD. It looks like you can only wrap using a 4axis machine. Even 3 axis doesn't work.
sorry, it has to do with the rotary axis setup. So it will work with a 5axis vertical, but the position of each of the rotary axis, is the determining factor.