| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| GibbsCAM Discuss GibbsCAM software here. |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
09-22-2008, 09:06 AM
| |||
| |||
The "Q" lets you start a thread at any radial angle while keeping the start point in the same place. Gibbscam handles this simply by projecting the the "X", "Z" start point. This works only to a point. On a tapered (4) start .25 pitch thread the start point is moved out so far i no longer have clearance to produce the thread. I own Compost and can modify my post but it's a huge task to undo the projection Gibbscam hard codes in to the path. Anyone have an example of a post that that allows you start a thread of this type using the "Q" function?  |
|
#2
12-29-2008, 08:17 AM
| |||
| |||
| *bump* |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Lets Start 3-axis "khattak Mill" | Khalid | CNC Wood Router Project Log | 46 | 01-14-2011 04:37 AM |
| Where is the "start from line" | mbinelo | LinuxCNC (formerly EMC2) | 4 | 08-12-2008 11:11 PM |
| G320 "common" or "+5vdc" why do they vary? | beezerlm | Gecko Drives | 3 | 01-12-2008 04:00 PM |
| Multi start threads | naytep | GibbsCAM | 0 | 09-06-2007 07:28 AM |
| 4020 fadal cant get past "Cold Start" | chipsahoy | Fadal | 13 | 03-07-2006 06:29 PM |
| | |
Linear Mode
