| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| GibbsCAM Discuss GibbsCAM software here. |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
04-30-2007, 07:51 PM
| |||
| |||
Anyone have a post or an easy fix to get code with no z moves? I have a plasma table and the software that came with it sux... I am spending too much time editing all the work, tool offsets and z moves. Any help appreciated.  |
|
#2
05-02-2007, 12:04 AM
| |||
| |||
| Are you using Virtual Gibbs for plasma cutting? Nothing like a little overkill (:-) Take a look at using SheetCAM. It's easy to learn and has plasma posts that do things in the right order and has plasma specific parameters like Pierce Height, pierce delay, lead-ins (4 types). lead-outs and provisions for using a touch-n-go surface sensor. Depending on the controller you have SheetCAM may already have a post that will work. Get more info at www.SheetCAM.com Tom Caudle www.CandCNC.com |
|
#3
05-20-2007, 06:48 AM
| |||
| |||
Here are 5 post processors for prototrak machines that I believe are 2-axis only. They came from burgerboy's site: http://cnczone.comPOST.html Hope One will work for you! |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 1st plasma table ?'s for my first post | johnnydmetal | CNC Plasma and Waterjet Machines | 12 | 10-24-2006 06:47 PM |
| plasma table | welderman | CNC Plasma and Waterjet Machines | 2 | 04-01-2006 11:32 AM |
| cnc plasma table | chiliuno | CNC Plasma and Waterjet Machines | 7 | 04-04-2005 09:36 PM |
| | |
Need 2 axis post for plasma table 
Linear Mode
