I have in the past managed to alter poste in Featurecam , which i know are easier to do than Gibbs but i though i would have a go . We are using an old version and i have got Compost2 and the manual . I have successfully alterred some of the standard bits that are in the main drop down menue but cant seem to get it to do anything else even though i know that the pst file and txt file need to be named the same . I have a Fanuc mill/turn post that is very close but want to change the home position so that the tool offset is dropped on the same line as the X250. Z250. line i.e X250. Z250. T0100 , and it doesnt put in G95 turning or G94 milling , or switch on live tooling . Any help would be greatly appreciated.
Mark
My email address is marksibley58@googlemail . Since i last posted i have managed to alter a 2 axis post to get what i want , but no joy with a 4 axis post in Gibbs .