Hi All,
I have a working post which working fine on 4th axis with Gibbs 2014 Version 10.7.6 64 bit. I upgrade to gibbs 2015 and now my post is no longer working. My A axis now became A400, A460 increment and so on. Do you guys know what is the issue?
F-STOP
Similar Threads:
PM me I may be able to help
You need update with compost4
Enviado desde mi iPhone utilizando Tapatalk
Go to FILE - PREFERENCES - click the FILE tab and make sure your "File Extensions" are set the same way as your GC 2014 was. IE..Post: EIA (Or whatever you Post file format was originally). I updated to GC 2017 from 2014 and I had to go back in to change my settings all over again.
Hi guys!
I need a Gibbscam postprocessor for my lathe. It's Colchester Tornado 200 with Fanuc 0T. Could anyone help?? I have one that has been modified from fanuc 0T to 10T, I could send it if anyone is proficient in changing it back maybe? Also I have some exemplary programs from the machine. Is this JeffCNC still operating?
you need inch or mm post
these are some posts i have on a computer i did dongle work for a customer
i also have the posts for Gibbs 2017,,
take a list of the posts below if it will help you can have for free, jst let me know which one
i dont know anything about this software, i was hired becasuse they lost their dongle
https://www.dropbox.com/s/a3hnbo4jki...11-98.txt?dl=0
keysoftwareservice.com
Last edited by number000073; 02-17-2018 at 11:00 PM. Reason: error
Hi!
Thanks a lot for the reply. I need a metric post. Maybe you could send me those metric posts you have for Colchester Fanuc 0T via e-mail? Maybe yod would have them for Gibbscam 2017? This is my address: bezsensu@interia.pl
Thank you a lot in advance, your help is much appreciated.
Best wishes
Jacob
here are the list of posts i have access to ,,, i couldnt find the one you specified ,,we made a list of the posts we have,,if you see which one you need please let me know,,,again i do not know much about this software ,,i was hired replace a lost dongle ,,,
List 1 ----------------------> https://www.dropbox.com/s/xsbfzf08v8...osts.html?dl=0
List 2-----------------------> https://www.dropbox.com/s/a3hnbo4jki...11-98.txt?dl=0
keysoftwareservice.com
hi
i need gibbs cam 2015 post file for milling and lathe
drop box links not working or deleted pl help me to take post file
hi
i need gibbscam post file do you got any ?
your help is much appreciated.
cheers
rith
you can PM me
i need a Gibscam post for Acramatic 2100
Marce, Hi its me again, Looking for a post for a new machine, 2000 DMG DMC103V 840D. Ill pay for a good one.... Thx Mark
Looking for a post for a Hyundai Kia SKT210Y lathe with a Fanic Oi-TC control. Any help would be greatly apprecaited
Once you go to GibbsCam version 12 or higher all bets are off with older posts, read your code carefully or get your post upgraded. Many new features added in to version 12 or higher need a post upgrade to work properly especially if you have a lot of older posts and machines.
Looking for a post for Schaublin 124 CNN + c axis, HELP, Nexusmi87@gmail.com