In earlier version of Gibbs when I ran machine simulations as a horizontal machine with a rotating B pallet, the tools would move and the part would rotate.
Starting with Gibbs 11.0.11 or so, now the part is MOVING and rotating a the tools a stationary. Anybody know where the secret check box is to get the tools to move and the part to stay still and just rotate.
If I chose Op Sim, the part doesn't rotate, the tools "rotate" around it. The part only rotates when I run it in Machine Sim. But if I run the part in Machine Sim, the part moves in X and Y instead of the tooling.
Yes right.
It depend of MDD that you select because you could say that X is in table or is in Head .
If you say me machine that you are looking perhaps could help you.