See "Rant gibbs vs mastercam!" post I answered your question there. Sorry.
Hi everyone,
Does anyone can help me to create toolpath for the ID groove with 45 DEG.
I attached the pic and Gibb file
Thanks so much
Similar Threads:
- Getting in the groove
- oil groove
- Need Help!- Groove on OD
- Newbie- Groove on O.D
- O.D. Groove
See "Rant gibbs vs mastercam!" post I answered your question there. Sorry.
"Teach the ignorant, care for the dumb, punish the stupid."
Can you help me to fix the I.D toolpath??
ThanksToolpath.rar
Issues were numerous. The groove tool will have to be a special Iscar or Manchester groover. The RPMs are off the charts. When ever you are using roughing operations you must have rough stock defined. You also were defining Xr stock, Z stock Finish stock all at the same time. Just use finish stock for now. So compare the operations one by one and note the differences. Also compare the tools I defined with your original ones.
"Teach the ignorant, care for the dumb, punish the stupid."