Need Help With a Feature


Results 1 to 4 of 4

Thread: Need Help With a Feature

  1. #1
    Registered
    Join Date
    Nov 2014
    Posts
    10
    Downloads
    0
    Uploads
    0

    Default Need Help With a Feature

    To me it seems it should be something easy to do. Here is what I got.

    Horizontal Lathe Generic
    Imported SolidWorks Model
    The O.D. turn has 2 grooves that I will cut with a groover.

    How do I do my rought turn so it does not want to try and dive down a little when I am roughing with an 80 degree tool?

    Similar Threads:


  2. #2
    Registered
    Join Date
    May 2007
    Location
    Norway
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Re: Need Help With a Feature

    Need Help With a Feature-uten-navn-jpg

    I think this will fix it



  3. #3
    Registered
    Join Date
    Nov 2014
    Posts
    10
    Downloads
    0
    Uploads
    0

    Default Re: Need Help With a Feature

    Awesome...that did the trick. Seems like a fairly basic thing, but I am self teaching and am learning as I go.

    Thanks for your help. Gives me an idea of what those options will do.



  4. #4
    Registered
    Join Date
    May 2007
    Location
    Norway
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Re: Need Help With a Feature

    I'm glad i could help



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Need Help With a Feature

Need Help With a Feature