Looking for simulation machine models

[montie]

we are getting machine simulation going in Gibbscam now. What about machine models? I am looking for some Haas and Okuma lathe models. Where can I find them or do we have to build them?

[dtm]

Probably have to buy them. Nothing is free.

[Species8472]

If you are under maintenance go to https://online.gibbscam.com

There's a link to samples.

Sample Machine Sim Models

Daewoo MX 2500 - r3.exe(3.32mb) 2011-03-04
e650HS-SM - r5.exe(3.58mb) 2011-03-04
Fadal VMC 4020 - r3.exe(1.89mb) 2011-03-04
GildemeisterSprint65 - r2.exe(1.85mb) 2011-03-04
Haas Vert 5th - r3.exe(7.67mb) 2011-03-04
Integrex200 IV ST - SM - r6.exe(7.15mb) 2011-03-04
Mazak e-650H-II-3000u - r4.exe(1.3mb) 2011-03-04
Mazak Variaxis - r2.exe(2.92mb) 2011-03-04
Mori NT4250 - r4.exe(630.41kb) 2011-03-04
Mori NZ2000_T3Y3 - r2.exe(1.39mb) 2011-03-04
Nexus 4000 Horizontal - r2.exe(3.46mb) 2011-03-04
Okuma A_C - r3.exe(2.6mb) 2011-03-04
Okuma Bridge Machine 5Axis - r4.exe(2.53mb) 2011-03-04
ST_TS_NSM_10Pos_BarFeed - r2.exe(1.16mb) 2011-03-04
Twin_Turn_No_Holders - r3.exe(2.91mb) 2011-03-04