Results 1 to 4 of 4

Thread: need help been left alone w/ Gibbs

  1. #1
    Registered
    Join Date
    Sep 2011
    Location
    usa
    Posts
    1
    Downloads
    0
    Uploads
    0

    need help been left alone w/ Gibbs

    Our programmer quite, and left behind Gibbscam that has been given to me I no nothing, nada, zip about it. I have 35 years of machining experience. I currently opperate puma MX2500ST a 9 axis machine tool. I also set up all our multi axis machines and train young machinist. It looks like I will have to train myself on Gibbs and I need help.


  2. #2
    Registered
    Join Date
    May 2004
    Location
    United States
    Posts
    4,519
    Downloads
    0
    Uploads
    0
    I use GibbsCAM 2004+. I can probably help you with some of the basics up to 3 axis. I find GibbsCAM is difficult to create a drawing and part geometry. I generally use other CAD to create a drawing and the save and import as a DXF file. Just posts your questions here, or in another thread, or email me direct and I will answer when I can and as I see them.
    http://www.kirkcon.com/


  3. #3
    Registered
    Join Date
    Dec 2010
    Location
    usa
    Posts
    57
    Downloads
    0
    Uploads
    0
    Where are you located? If were close I might be able to help you in person.
    www.compositescentral.com


  4. #4
    Registered
    Join Date
    Aug 2011
    Location
    united states
    Posts
    7
    Downloads
    0
    Uploads
    0
    Hi , maybe i can help, i've been using GibbsCam for a while now, if you can give me some contact info maybe we can work something out . Do you have an e-mail address ?


Similar Threads

  1. Build Thread- From Left-Overs
    By machineitright in forum DIY CNC Router Table Machines
    Replies: 19
    Last Post: 02-21-2011, 07:09 PM
  2. Steps being left in cut
    By kmacht in forum DIY CNC Router Table Machines
    Replies: 4
    Last Post: 01-30-2011, 10:14 PM
  3. RFQ-5 left and 5 right
    By rbest27 in forum Employment Opportunity
    Replies: 3
    Last Post: 02-27-2009, 08:49 PM
  4. align left
    By kendo in forum EdgeCam
    Replies: 2
    Last Post: 11-19-2008, 06:22 PM
  5. Right or Left Handed?
    By Asinity in forum General Metal Working Machines
    Replies: 6
    Last Post: 09-08-2008, 03:04 PM

Posting Permissions


 


About CNCzone.com

    We are the largest and most active discussion forum from DIY CNC Machines to the Cad/Cam software to run them. The site is 100% free to join and use, so join today!

Follow us on

Facebook Dribbble RSS Feed


Search Engine Friendly URLs by vBSEO ©2011, Crawlability, Inc.