post processor gibbscam for fanuc

[igig2004]

Hi ..I'm new of this forum! I'm italian and I work with a machine Mithubishi M320
and gibbs cam 6.11(2002 year)

i research post processor..for this..

It's must have G91G28Z0 on starting of program,,
and tools search T20-M6 ..in the single block
not T20 and M6 in onother block..

sorry but it's a delicate older machine :]

insert one exsample of tipical program:

O0001
G91g28z0
t11m6
g54
g90x0y0s600m3
g43h11z20m8
g99g81z-12r5f50
g80m9
m5
g91g28z0
m30

THank you in advance!

[double a-ron]

Sounds like typical Fanuc post. Looks like any Haas post would work as well.

[igig2004]

Sounds like typical Fanuc post. Looks like any Haas post would work as well.

I tried.
unsuccessfully

[jeffliu2]

Hi ..I'm new of this forum! I'm italian and I work with a machine Mithubishi M320
and gibbs cam 6.11(2002 year)

i research post processor..for this..

It's must have G91G28Z0 on starting of program,,
and tools search T20-M6 ..in the single block
not T20 and M6 in onother block..

sorry but it's a delicate older machine :]

insert one exsample of tipical program:

THank you in advance!

Most Mitsubishi POST no G91G28Z0 at begining, tool change and something else no good. Even need some special Codes such as ",R0" for Tapping : G84G98X0.Y.2Z.-.5R.1F10.,R0

Same question: About Mitsubishi POST

[double a-ron]

jeffliu2, I knew something else had to be going on. The sample code he posted is identical to my Haas post that Gibbs created for me, and the ones I've seen in your library.