Fired up the TM-1 last night for the first time! Got everything wired, and cleaned all the cables up and routed them to the computer. Checked and rechecked all the connections to make sure everything was tight and hooked up to the right place. Loaded an elk from the EZ Art files that come with the TM into the CAD program, sized it for the piece of scrap 1/8" flat bar I had in the shop, and loaded it in the computer. First run, first cut, everything worked perfect! It was such an awesome feeling to watch it run after spending sooooo many nights building everything......watching it move to the first cut, the THC doing it's thing, very cool!
Thanks to all those on here what have PM'd me with suggestions and ideas! You know who you are! When I can find the cable for my camera, I will post a pic or two of the elk.