Problem: ELOX EDM with Fanuc 11M

[cahipun]

We have problems with an Electrical Discharge Machine (ELOX heritage 12, with FANUC 11 M).

The machine used, and we are trying to get it up & running, however, we receive following error messages:

SV013 X IMPROPER V_READY OFF
SV013 Y IMPROPER V_READY OFF
SV013 Z IMPROPER V_READY OFF
BREAKE ENGAGED

It would be very kind if somebody has an idea what to do.

Many thanks in advance!!!

[valvulin]

Estas son alarmas de los servos de los ejes X, Y, Z, verifica la alimentación +24V +15 +5, o revisa si no hay micros de seguridad accionados..

Suerte..

------------------

These are alarms of the servos of the axes X, Y and, Z, checks the power +24V +15 +5,etc.. or checks if there are no safety microswitch actived..

Good Luck..
Sorry, my english is very bad..