I bought an AGIECUT 100 about a year ago at an auction that was supposed to work but I've never been able to make it move around. The Pendent is an AGIE RC-123. It all lights up when I first turn on the machine and then goes blank after. It doesn't matter what button I hit after that on the pendant, it won't do anything or light up. I have a 460 and 464 error message that comes up which both have to do with the RC-123. No communication from RC-123 to machine and faulty RC-123 which both say to contact service. If anyone around my area thinks they can fix this, I'd be happy to pay someone to take a look at it. I don't think I'm going to use it very much and I just want to get it running so I can sell it and not take too much of a bath on it. I need to get some space in my shop. I'm about 45 min north of the Kitchener/Waterloo area in Ontario Canada. Thanks,
Last edited by kmcmillen571; 10-06-2011 at 08:01 PM.