Procut CNC 4X4 Plasma Table(pic Heavy)

[R08ert209cali]

About a month ago I contacted Procutcnc.com a division of TMI a vendor here And talked with Rob Gaskins. He was very helpful and answered all my questions. We talked for about an hour.

He set me up with a GK4400 Gantry Kit. ProCutCNC.Com Tel:763.315.5019

I also added the.
gv540 300 oz. motor package.
Thc 300b Torch height Control.
6" Z axis
Hand Held Torch Mount.
Bobcad V21 And Mach 3 Package

For a total of just a little above $4000

The steel I ordered from Modesto Steel.

4 Sticks 2'X2' square tubing.
1 4'X8' Sheet 14 Gauge Sheet metal.
6 Sticks 4" X 14 Gauge Flat Stock.
1 Stick 2" X 1/8" Flat Stock.
1 12" Stick 3" X 1/4" Cold Rolled Steel.

For a total of around $500.

The reason I went with Procut CNC was price and options.
I really did not see anyone else selling a quality table with fully licensed software and ATHC for under $5000.

[R08ert209cali]

Motor connector kit and small parts.


Motors.


Z Axis




Power Supply




Lousy Gantry pics.

[R08ert209cali]

[R08ert209cali]

Motor Mounts.



Gecko Motor Controller


ATHC

[R08ert209cali]

Building the frame. Fully Tig Welded (For practice Still Suck)





Gantry Test fit:smokin:


Coming Together


Going Mobile


Prepping the Cold Rolled For welding


As it sits tonight. Made good progress hope to be done with mock up tomorrow. then it is time to start the water tray.

[R08ert209cali]

I fully expect to be needing a lot of help to get this thing going.

[DigitalPunk]

subscribed to your thread. I am getting ready to build their 4x8 table and interested how yours turns out.