20 EDM

[Eagle23]

20EDM
I know someone and he has this machine.
I took a look at it and I think it was folded and not opened up because it didn't look exactly like this machine on youtube.
But it did write 20EDM on it.
[nomedia="http://www.youtube.com/watch?v=9J_BbA3oQec"]YouTube - Mitsubishi FX-20 EDM[/nomedia]
He asked me if I would be able to use it.
What I would like to know from this forum is can I make files on Cambam or any other program or mecsoft and start machining with 20EDM.

Also I have never used a CNC machine but I have done lots of work with Rhino and a bit with Cambam and similar programs.
Under these conditions what are some of the things I should pay attention to so I can start using 20EDM.

Also where else can I get help for this
Can I use mecsoft files for this machine
Any help would be appreciated
Thanks

[Eagle23]

I am doing some research on this subject of EDM to get more familiar with it.
Is there any software that specializes in this field