Charmilles Robofil 510 Aux codes

[tallenttoolroom]

Does anyone have a list of Aux codes for the Robofil 510? I am especially looking for the code to bring the pumps from sleep mode. Cheers.

[mdynac]

AUX,89

AUX,90


one is pumps on and the other is pumps off.

can't remember which one is which.

the pumps off has like a 20 second delay before turnig them off, so please be patient.
the pumps on is instantaneous.

[tallenttoolroom]

Thanks for that. I'm sorted.
Out of interest does anybody have the full set of codes??

[kip0569]

Does anyone have a list of Aux codes for the Robofil 510? I am especially looking for the code to bring the pumps from sleep mode. Cheers.

I can fix you up.

Send me an e-mail address and I will send it over.

While I am in the book, anything else you need?

Dale Crisp

dale@edmwirecraft.com
www.edmwirecraft.com

[KilrB]

Which control does your 510 have?

[tallenttoolroom]

Sorry i don't know which version controller we have. How will i find out?

[KilrB]

You will have either the Fanuc made "Millenium" controller or the Charmilles made "Console 2' controller.

If you do not see "Fanuc" on any of the boot screens it should be the "Console 2".

However, I wouldn't bet money on it as there do seem to be some differences between US and European machines even with the same controllers.

On our "Console 2" machines the MDI command "AUX, 50" turns the pumps off and "AUX, 51" turns the pumps on.

Our "Millenium" machine will accept the same "AUX" commands as the "Console 2" machines but also has it's own specific commands for the same functions.