Anyone know how to solve CNPLOT question?

[lokyrepublik]

Okay so im having a big problem turning this question sheet into codes to input into cnplot program.....PLEASE IF ANYONE KNOW HOW TO DO IT HELP MEEE!!!

THIS PICTURE IS THE SHEET PROBLEM...





AND THIS IS THE TEMPLATE WHICH I HAVE TO FILL IN....


01234 (PROG NAME AND SAVE AS)
(DNG#123 REV#456)
(MM/DD/YEAR)
(PROGRAMMED BY: NAME HERE)
(PART ORIGIN )
(MATERIAL : )

(T01___ )
(T02___ )
(T03___ )

N1 G20 G21
N2 G17 G40 G80 T01
N3 M06
N4 G90 G91 G54 G00 X__ Y__ S__ M03 T02
N5 G43 Z1.0 Z25.0 H01 M08
N6 G99 G98 G81 G82 G83 G84 G73 Z__ R__ P__F__


(PROGRAME OPERATION__)

N7 G80 Z1.0 Z25.0 M09
N8 G28 Z1.0 Z25.0 M05
N9 M01 M00

N10 T02
N11 M06
N12 G90 G91 G54 G00 X__Y__S__M03 T03
N13 G43 Z1.0 Z25.0 H02 M08

N14 G99 G98 G81 G82 G83 G73 R__Z__P__F__(DRILL)
N15 G01 X__Y__F__
(____________)
(PROGRAME MOVE)
N16

[dertsap]

http://www.cncezpro.com/gcodes.cfm

[CNCRim]

what seem to be a problem? it's pretty straight forward you just have to fill out the X Y ...... that's all.


01234 (PROG NAME AND SAVE AS)
(DNG#123 REV#456)
(MM/DD/YEAR)
(PROGRAMMED BY: NAME HERE)
(PART ORIGIN )
(MATERIAL : )

(T01___ )
(T02___ )
(T03___ )

G20
G17 G40 G80 G90
T01
M06
G90 G54 G00 X15. Y15. S545 M03
G43 Z1.0 H01 M08
G98 G81 Z-14.R1.P2F6.
X85.Y12.
X54.Y26.
X27.Y45.
X85.
G80
M1

Repeat cycle and you can replace G83 82 73 where G81 is at.

A lot of guy on here can help you, but your question have to be more clear.

[lokyrepublik]

SORRY i shouldve made it more clear. im trying to fill in he template so that it could simulate the drill in the program cnplot.

[dertsap]

edit

[CNCRim]

after done edit, save the program and open the file up again..... now it should simulate.