Need Help! Knurling - CNCzone.com-The Largest Machinist Community on the net!

vbundy · #1 12-31-2009, 02:24 PM

Knurling being new to me. My print calls for a .192 base diameter and a knurl diameter of .204 +/-.002 over truncated med. diamond knurl. I have a 96 dp 1/2 wheels with a straddle knurler. Do I set the knurl wheels to .192 to acheive a medium knurl? Probably a no brainer but I thought I would ask. Does the print usually call out the dp?

vbundy · #2 12-31-2009, 02:45 PM

Sorry, new years eve and number numb. I meant set to .180.

kling8 · #3 01-08-2010, 02:38 PM

Yes there should be a DP, I would go light into the part and bring down your wear offset to get the correct depth, different material will knurl different, measure, make adjustment and there you go.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Need Help!- KNURLING	KENWILD1	Haas Lathes	6	01-29-2009 12:31 PM
CNC Knurling	Gary4man	General Metalwork Discussion	3	11-19-2008 07:43 PM
Knurling with V9	DublJ	Mastercam	1	01-04-2008 08:31 PM
Knurling	gr8life	General Metal Working Machines	1	10-31-2007 05:02 AM
Knurling ?	Ken_Shea	General Metalwork Discussion	13	02-23-2004 10:17 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)