| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| General Metalwork Discussion Discuss everything relating to metal work. |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
08-27-2009, 08:07 AM
| ||||
| ||||
Hi, I need a good varm-up program for my VMC. If anyone has such a program, please post it here. Don't know suitable duration, but guess 20-30 min. is ballpark. My travels, feed rates, speeds etc: X= 800mm Y= 450mm Z= 500mm Spindle speed= 50 - 6000 rpm. Feed rates, machining = 1-10 000mm/min Rapid X, Y= max 18 000mm/min Rapid Z= max 15 000mm/min Control: Mitsubishi Meldas 520 AMR 1996  |
|
#2
08-27-2009, 11:05 AM
| |||
| |||
Hi, Maybe you can use something in this pdf File for Fadal machines. Look for the Workout Programs Starts at Page 9. Edit as needed for you machine. Good Luck on your Mission. DJ Omaha,NE |
|
#3
08-27-2009, 04:56 PM
| ||||
| ||||
| Thanks DJ, I will analyse it and check if there are any G- and M-codes that I don't have in my machine, and that one is inches, right? My machine is set for mm (we do that on this side of the pond). It will take a little while, but your program certainly serves as a basis to create my own version. |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Spindle Warm Up Program | stang5197 | Haas Mills | 5 | 03-29-2011 01:13 PM |
| factory warm-up program for fadal 4020 | wdwrd68 | Fadal | 5 | 08-14-2009 07:02 PM |
| Warm-up program | chuy | Fanuc | 1 | 12-11-2007 10:10 PM |
| Warm Up | fadalman | Fadal | 1 | 09-15-2007 11:24 AM |
| How warm should steppers get?? | Stuff-Builder | Stepper Motors and Drives | 8 | 03-25-2005 01:02 PM |
| | |
Fadal Service programs 
Linear Mode
