Need Help!- Numeripath 800M and 8000 Series on G&L HBM

[mmrr]

Looking for a good source of control operational manuals for the Numeripath Control (800M and 8000)on some monster G&L horizontal boring mills. A, G and M code card with all avaialable codes would be great to start. I am looking for screen navigation information for offsets(tool and work), macro variable storage, program storage etc... Never used Numeripath so let me know what other identifying information you would needThanks

[RICHARD ZASTROW]

Try Giddings & Lewis. They should have manuals etc. I believe the controls were under the "juridiction" of Davis Tool Electronics Div.

I'll see if I can find more info.

I used to be in their plant so often they threatened to issue me a time punch card. LOL

Dick Z

Add: G&L is now G&L MAG controls are now G&L Motion Control, A Danaher Co.

[1234567]

i hope you didnt buy a ram 500.If you did you wont be needing those manuals.

[RandyBill]

Here a PDF

[ineed12]

phone 921-920-9400 ask for Russ Drake. He is tech instuctor at g&l. He heiped me on 400 control. predecessor to 800. I worked on 450 hbm for years I maybe able to help.

email dedtard@hotmail.com