Drilling 0.3mm hole in 2mm Delrin with a router - CNCzone.com-The Largest Machinist Community on the net!

		CNCzone.com-The Largest Machinist Community on the net! > MetalWorking > General Metalwork Discussion
Drilling 0.3mm hole in 2mm Delrin with a router

General Metalwork Discussion Discuss everything relating to metal work.

This forum is sponsored by:

02-03-2009, 10:00 AM

Join Date: Dec 2008

Location: Switzerland

Posts: 20

Drilling 0.3mm hole in 2mm Delrin with a router

permalink

Hi All,

I want drill 64 0.3mm holes in a 2mm thick Delrin sheet using my router.
Min. spindle speed is 10'000 rpm.

Am I dreaming?

Funnily I find myself wanting to do a lot of things on my router which are probably better suited for a mill .... but since I don't own a mill....

I have a hard time deciding where the limits lie.

Thanks for any suggestion.

Serge

« Previous Thread | Next Thread »

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are On Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Drilling Delrin	Slivers	General Metalwork Discussion	8	03-11-2009 11:45 PM
Hole drilling help	stevehuckss396	General Metalwork Discussion	23	01-27-2008 01:15 AM
Drilling a .010 hole	CoolhandLuke	General Metal Working Machines	7	03-25-2007 10:44 PM
Drilling a hole in a 3D model	mayhugh1	SprutCAM	5	10-25-2006 11:51 AM
Deep hole drilling on OKK	eddie	G-Code Programing	1	09-21-2005 06:55 PM

All times are GMT -5. The time now is 01:34 PM.