Need Help!- Looking for a low volume CNC vendor

[sn96]

Hello all,

I have a part I designed and a friend I met online a few years back cut the part for me. He used a Haas 6 axis machine. I have lost contact with him so I have decided to look for someone else interested in doing some side jobs. I'm at work so I can't post any pictures of my sample until later. The part is small: 2" H x 2" W x 2.75" L it’s a 3D part that would have to be cut in separate stages. I'm looking to pay around $70 a piece x 10 pieces.

The part is a aluminum robot head machined out of T6061 I want to sell these as an accessory to the hobby robot community. Only picture I have of it can be found on my personal project web page www.geocities.com/botwire

Thanks in advance

[timmydabull]

seventy dollars sounds like a great price for that part,it is a nice part as well.

do you have the solid model for the part?

[jerryw]

Hi
Don't know if you have found anyone yet but we offer small scale, short run or prototype CNC machining.
Please see our web site at www.jmprecision.co.uk if you are interested.
We would need a drawing (we can create 3D drawings from 2D if required) or if you have a sample that would do.
We could then give you a price for approval.

Regards
Jerry