Page 1 of 2 12 LastLast
Results 1 to 12 of 18

Thread: Best Cnc for small 6061 alum. part.

  1. #1
    Registered
    Join Date
    Oct 2008
    Location
    usa
    Posts
    8
    Downloads
    0
    Uploads
    0

    Best Cnc for small 6061 alum. part.

    Hey everyone,
    I'm new at cnc and need help finding the best machine for job at hand. I will be milling 1 part made of 6061 about 3" x 4". The machine will need to be able to run at least 8 hrs. a day continuous except to change out part. From all those that I have spoke with lead me to the Tormach or Industrial Hobbies.
    Which both seem to be very reputable. I've recently been turned on to the enclosed 2008 cnc machining center Mikini 1610L. All these machines are in my price range & I really like the enclosed part of the Mikini. Anyone with Mikini info besides Mikini reps.Truthfully I was sold on Ind. Hob. until now. Any advice will be appreciated. Also, if anyone has other machines in mind in this price range all options are still open. Would really like auto tool change but have not found in my price range.
    Thanks,
    Duane


  2. #2
    Registered
    Join Date
    Jan 2005
    Location
    USA
    Posts
    2,921
    Downloads
    0
    Uploads
    0
    Hi duaneblk

    I not sure what you are looking for or at but the Mikini is night & day different from the other 2

    The machines that you have picked out the best of the 3 is the Mikini by the spec that is on there site next would be the Tormach & then the Ind. Hob.
    Mactec54


  3. #3
    Registered
    Join Date
    Sep 2004
    Location
    Canada
    Posts
    205
    Downloads
    0
    Uploads
    0
    There's not many (if any) machines with toolchangers for ~$10K (I'm guessing that's your budget), but if you think you're going to need a tool changer now, get it. It may take a while for it to pay for itself, but it will, and when you need it, it will be worth it.

    The tool changer will let the machine run truly unattended (freeing you up to make money elsewhere), prevent operator fatigue (6 tools per part x 1000 parts gets tiring pretty fast), and prevent operator error (try hitting "cycle start" with a (long) drill in the spindle when the controller expects a (short) end mill - crash city).

    Chris Kirchen


  4. #4
    Registered
    Join Date
    Feb 2007
    Location
    usa
    Posts
    158
    Downloads
    0
    Uploads
    0
    First of all, whats your price range?

    There are alot of good used machines out there for that kind of money.


    If you can find one that was in a primarily aluminum shop, they could have many years of use left on them.

    And the good side of a down economy is, if you do have money to spend, you can get some great deals!
    I hate deburring.....
    Lets go (insert favorite hobby here)


  • #5
    Registered Donkey Hotey's Avatar
    Join Date
    Nov 2007
    Location
    USA
    Posts
    1,650
    Downloads
    0
    Uploads
    0
    Quote Originally Posted by duaneblk@yahoo. View Post
    I will be milling 1 part made of 6061 about 3" x 4". The machine will need to be able to run at least 8 hrs. a day continuous except to change out part.
    Does that mean that you will be standing there, changing the parts for 8 hours a day? What about tool changes? Are there any drilled or threaded holes? How many of these do you need to make?

    3x4 is not really a 'small' part. 8 hours per day is industrial duty. Keep in mind that a hobby mill is just going to destroy itself in that kind of environment.

    I'd take a look at a really old, used Haas VF-1 or VF-2 before I'd buy a hobby mill for this application. I think hobby mills are good for custom jobs, one-offs or a few dozen parts. After that, you'll want an enclosure, flood coolant and a tool changer.

    How many of these do you need? If the design is finalized, you might do better to just post the part in the RFQ portion of the site and see what it would take to get them made.

    Trust me: if somebody with a real machining center can't make them for an attractive price, you won't be able to pay off a similar machine of your own, or make any money with a lesser machine.
    Greg


  • #6
    Registered
    Join Date
    Jun 2006
    Location
    USA
    Posts
    21
    Downloads
    0
    Uploads
    0
    I too have been eyeing the Mikinis that are on sale right now for all the same reasons Duane and Mactec give, but also would like to hear from someone other than a rep or press release about their experience with that machine.

    I'm strictly a hobbyist, doing at most a few runs a day of prototype R&D type components out of my home shop (limited to 220/1/60 for power, which limits my options) for a performance parts business. Any feedback on these machines would be great!

    Merry Christmas!

    -R


  • #7
    Registered Donkey Hotey's Avatar
    Join Date
    Nov 2007
    Location
    USA
    Posts
    1,650
    Downloads
    0
    Uploads
    0
    Quote Originally Posted by arpieb View Post
    I'm strictly a hobbyist, doing at most a few runs a day of prototype R&D type components out of my home shop (limited to 220/1/60 for power, which limits my options)
    I just looked at that Mikini. It's got R8 tooling which means difficult tool changes (more difficult than you'll do in the middle of a program). Yeah, you can buy specialized quick-change tool holders that adapt to the r8 spindle but then you're losing Z clearance and getting into specialized tooling that still needs to be manually changed.

    The economy is in the tank. There are nice, used machining centers out there for $12-15K. A rotary phase converter is not that big of a deal (lots of guys in the Haas forum have done it--myself included).

    For those interested, try this site:
    http://www.craigshelper.com

    It's a craigslist search engine that pings multiple sites, based on a radius from your location. I've seen the old fiberglass Haas VF-1s for under $15K.

    I'm not bashing the hobby machines but I see lots of posts in these forums from guys wanting to do true production levels with machines just not designed for it. Be sure you know what you're getting into before taking the plunge on a machine that will drive you nuts after the fifth consecutive part.
    Greg


  • #8
    Registered
    Join Date
    Jun 2006
    Location
    USA
    Posts
    21
    Downloads
    0
    Uploads
    0
    Quote Originally Posted by Donkey Hotey View Post
    The economy is in the tank. There are nice, used machining centers out there for $12-15K. A rotary phase converter is not that big of a deal (lots of guys in the Haas forum have done it--myself included).

    ...

    I'm not bashing the hobby machines but I see lots of posts in these forums from guys wanting to do true production levels with machines just not designed for it. Be sure you know what you're getting into before taking the plunge on a machine that will drive you nuts after the fifth consecutive part.

    Sorry, I can't type your board name without laughing - I'll go with DH.

    The thing is DH - the Mikini's are on sale for $8500, which is stilll a far cry from $12-15K. Financing on a new units is MUCH easier and cheaper than a used one. They are also under under warranty. If I bought a used VMC of late-90's vintage (which is the price point you are talking about) then I'm SOL if something breaks - and out a lot of money to repair it.

    In addition - I'm not looking for production - strictly prototype work - which is a much lighter load, and not unattended/lights-out operations.

    As for quick-changes - MicroKinetics (http://www.microkinetics.com) has a nice R8 quick change tooling system that I have seen in action that doesn't give up too much Z clearance - which the Mikini appears to have in spades for a perceived hobbyist machine.

    Again, I'm more interested (as I'm sure Duane is as well) in hearing from someone who has actual experience with the Mikinis instead of assuming they are not in the same class as a 15-year-old Haas VF-1.

    Not everyone has the room, resources, or finances to buy and maintain a large mill for home shop work... Please keep that in mind.

    -R


  • #9
    Registered Donkey Hotey's Avatar
    Join Date
    Nov 2007
    Location
    USA
    Posts
    1,650
    Downloads
    0
    Uploads
    0
    I agree with all of your points--that's why you should look at the larger machines.

    For example: you could spend a bunch on the R8 tool change-out systems. Tack that onto the cost of the machine, cuz you won't be using that if/when you upgrade to a Cat40 machine.

    I also agree on the repair costs. That's one you'll have to sort for yourself. Haas is one of the cheaper brands to repair (from what I've read here). The real challenge is to buy a machine that is under power and can be inspected as running, then have it moved by an insured rigger and probably installed by your local Haas Factory Outlet (they can handle the minor stuff on startup and give it a clean bill of health).

    Here's where I'm coming from (if you didn't see it in my sig line): I have two CNCs--a vertical maching center and a lathe.

    Haas VF-2: fully automatic machining center with a 20-pocket tool changer. It's pricey but a pleasure to run. It's designed for production. I cannot imagine life without a toolchanger or trying to make even a basic part with a single tool.

    Haas TL-2: tool room lathe, with a standard quick-change Dorian tool post. This is the lathe equivalent to the mills being suggested here. I have to do all the tool changes manually. It has coolant shields but it still makes a mess. Making a lot of parts on it can be a challenge. I have to be standing there to do every tool change. I get coolant all over my hands and often on my clothes. The tool post holds tolerance, as long as I make absolutely sure that there is no debris in the tool block when I change the tool.

    Because of the manual tool changes on the lathe, I'd happily make a thousand parts on the mill before I'd make 100 parts on the lathe.

    Again, the hobby machines have their place. They are great for what they're designed for (a hobby). We see people coming in here wanting to do more with them than they're designed to do.

    When you start thinking about dozens of parts or more, I assume it's because you want to make money. You probably can't make any money doing production with a hobby machine (if you really factor in all of your time and expenses). I'm not knocking your decisions--just trying to get you to think through the whole problem before making a choice.
    Greg


  • #10
    Registered
    Join Date
    Oct 2008
    Location
    usa
    Posts
    8
    Downloads
    0
    Uploads
    0
    Thanks,
    Maybe I should wait until I can get some quote's on someone else machining part.
    I didn't realize there was so much involved. Which machine do think would be best to learn on.


  • #11
    Registered Donkey Hotey's Avatar
    Join Date
    Nov 2007
    Location
    USA
    Posts
    1,650
    Downloads
    0
    Uploads
    0
    I should have thrown two more options out there:

    Haas introduced their Toolroom Mill back in 2003 (TM-1) and Fadal had the TRM-1 about the same time. Since they both came out at the $20K price point and they've had 5-6 years to depreciate, either model could be an alternative for about $10K (if you can find one).

    I don't know about the Fadal but the Hass runs on single-phase power. Make sure you find one with a tool changer. One guy in the Haas forum traded up from a Fadal Toolroom mill to a Haas machining center because he was tired of manual toolchanges on his Fadal.
    Greg


  • #12
    Registered
    Join Date
    Jul 2005
    Location
    Canada
    Posts
    11,960
    Downloads
    0
    Uploads
    0
    Also look for older Haas MiniMills; these came out in 2001. We have one dating from back then that has done many thousands of hours work with minimal maintenance.

    I think the advice to consider getting your parts done outside is probably the best. Unless you are an experienced machinist it is a big challenge to design, prototype and then produce parts on your own machine; much better to farm it out to experienced people. Be upfront with anyone you deal with, explain your long term goal is to do your own in-house manufacturing and be willing to pay a sensible price for what you have done.
    An open mind is a virtue...so long as all the common sense has not leaked out.


  • Page 1 of 2 12 LastLast

    Similar Threads

    1. Breaking small drills in 6061 - what to do?
      By SRT Mike in forum General Metalwork Discussion
      Replies: 8
      Last Post: 11-26-2008, 07:19 PM
    2. Small RC Boat part on X4+
      By john_t_h in forum Syil Products
      Replies: 4
      Last Post: 07-23-2008, 02:53 AM
    3. What's the best 1/8" end mill for 6061 alum.
      By Cycle Start in forum General Metal Working Machines
      Replies: 10
      Last Post: 03-18-2008, 09:34 PM
    4. RFQ - Alum. 6061 bracket
      By Msport in forum Employment Opportunity
      Replies: 8
      Last Post: 10-04-2005, 08:40 PM
    5. RFQ Small part
      By impact in forum Employment Opportunity
      Replies: 2
      Last Post: 02-14-2005, 03:05 PM

    Posting Permissions


     


    About CNCzone.com

      We are the largest and most active discussion forum from DIY CNC Machines to the Cad/Cam software to run them. The site is 100% free to join and use, so join today!

    Follow us on

    Facebook Dribbble RSS Feed


    Search Engine Friendly URLs by vBSEO ©2011, Crawlability, Inc.