Video of my machine. It will take a while to display. - CNCzone.com-The Largest Machinist Community on the net!

ynneb · #1 08-11-2004, 04:06 AM

This may not work in all browsers. It does work in Explorer.
Make sure your sound is not turned up too loud.
If you want to download the bigger video version that is clearer to see, you can get it from here http://www.dnd.net.au/Movie_0002.wmv (9 meg)
If your browser wont allow this video to display you can still download the small video for here http://www.dnd.net.au/Movie_0001.wmv (1 meg) You can restart the video by right clicking on it, and pressing start.
You can see the stuff I make with this machine here www.trend.com.au
You may need to scroll down a bit to see it.
<html>

<head>
<meta http-equiv="Content-Type" content="text/html; charset=windows-1252">
<title>New Page 1</title>
<meta name="Microsoft Theme" content="cascade 001, default">
</head>
<body>
<p>
<iframe name="I1" src="http://www.dnd.net.au/y.htm" width="588" height="416" scrolling="no" border="0" frameborder="0">
Your browser does not support inline frames or is currently configured not to display inline frames.
</iframe></p>
</body>
</html>

sendkeys · #2 08-11-2004, 07:07 AM

cool video

what controller software are you using there?

ynneb · #3 08-11-2004, 07:17 AM

I am using Mach2. The bigger video shows it clearer

Bloy2004 · #4 08-11-2004, 08:38 AM

Nice video there, Ben!

Ken_Shea · #5 08-11-2004, 09:33 AM

Thanks Benny, very enjoyable seeing all your work in action. I thought I heard the word "Beautiful" in the background sound you must have been satisfied with the results.

High Seas · #6 08-11-2004, 11:29 AM

Originally Posted by Ken_Shea

I thought I heard the word "Beautiful" in the background sound you must have been satisfied with the results.

Nahhh - I bet he was talking about the helpmate that was watching the machine while he filmed!

arvidb · #7 08-11-2004, 02:45 PM

Great video! Nice to see some timing belts in action in addition to the "router action".

Arvid

ynneb · #8 08-11-2004, 06:07 PM

Nearly right HighSeas, He was doing the videoing, If I had done it i would have put a lot more close up shots of all the working parts. Next time I will do that.

Patrick2by4 · #9 08-11-2004, 07:11 PM

excellent video benny, I didn't realize your machine was that big. (You got to do something about all that spaghetti)

c-c-cncboy · #10 08-11-2004, 07:38 PM

OMG Benny - noooooooooooooo! Those poor lil dolphin babies you harvest in the wild and cast in resin in your chow bowls and border tiles - *sob* - *choke* - nooooooo!
Terrence (crumpled and inconsolable)

Splint · #11 08-12-2004, 05:01 AM

Well done Benny...
I'll have to come up and see it run some day.
Cheers
Splint

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
My First CNC Machine, Mr. Chips	Mr.Chips	DIY-CNC Router Table Machines	81	02-10-2007 10:04 AM
Video of water cutting machine	ynneb	CNC Plasma and Waterjet Machines	9	03-03-2006 07:32 PM
Heads Up - Article about building CNC Milling Machine	samualt	CNCzone Club House	3	06-13-2005 03:43 PM
FeatureCAM Expands Product Offering with Machine Simulation	CNCadmin	Product Announcements & Manufacturer News	0	01-21-2005 07:58 PM
CNC machine video	CNCadmin	DIY-CNC Router Table Machines	10	11-19-2003 09:46 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)