CNCzone Network: RFQwork :: 3Dstuffzone :: Welderzone
Looking for a reliable source for low volume, prototype, custom made helical gears.
These are generally used in pairs with drive and driven members.
The drive gears are 12-16 pitch and 12-24 teeth, OD is usually UNDER 3".
Here's the trick: the drive gear is usually HIGH helix angle (49 to 58 deg).
The driven gear is the complement needed to affect a 90 deg axis change.
Application: automotive distributor drive/driven gears.
Material: mosly 4150 H&T (drive gear), Gear bronze (driven), perhaps others as situations warrant.
Stricktly low volume/prototype levels.
MUST be certifiable to AGMA 7 min, 10 preferred. Some terms/specs negotiable.
Send P/M for details/contact info...