How/what machine to shape a thin stainless plate to become a "half" egg shape ?

[Calico]

I'm looking for a machine to shape a thin stainless steel to become a half egg shape, small size... about 10 inch or smaller.

which machine and what you called it to do that job ?
pounding machine does that or what ?

I need very smooth result for thin stainless steel material.

help please.

regards
cal

[Geof]

Search on 'Metal Spinning' this is how sheet material can be formed into shapes like you want.

[Calico]

thanks, but how about doing the non symetrical shape ?

cal

[Geof]

Originally Posted by Calico thanks, but how about doing the non symetrical shape ? cal

Ah, you mean half an egg longways not half an egg crossway which would be rotationally symmetric.

I guess a hammer and a form is the answer but my field is things that go round like lathes so I am not much help here.

[holbieone]

you can use an English wheel

just one of many links ,Google English wheel

www.techspot.com/vb/topic18654.html

[Weldtutor]

Originally Posted by Calico I'm looking for a machine to shape a thin stainless steel to become a half egg shape which machine and what you called it to do that job ? pounding machine does that or what ?

A search for "Nibbling Machine" will show what you require.

These machines have various dies/cutters depending upon shapes required.
They will shear, slot, louver, bead, dish, planish etc.
The proper shaped planishing or dishing tools fitted to the machine, will give the shape you require with very smooth finish if used properly.