Self Training Materials

[Super-D]

Hello,

I really want to get a CNC Mill and have never worked with one. Also metal working is just a hobby (just started with a lathe) for me as I'm actually an IT manager.

Before I buy a mill I need to learn more about them so I'm looking for user recommended sites, book, videos and DVDs that will help take a beginner to a higher level even if it's only 2 or 3 steps higher so I can make a better buying decision. I'm interested in learning about G and M codes, controllers, and the various types of mills. Basiclly anything a beginner would need to know. Because of my work schedule and location trying to go to a course at a college like Ivy Tech is not really possible so it's going to be "home" training.

Since I'm sure there are/were a lot of beginners on this site I thought I would ask what worked for you. I don't mind spending the money on materials as long as they are worth the money.

I've also been looking at a lot of CNC mills and figure my budget for a mill will be about 15k-20k. Yes I know this is a lot for a hobby but I'm hoping I can turn it into additional income later down the road so hopefully if I'm armed with the information I can make a good choice in my purchase.

If this is in the wrong forum I apologize and if so please point me to the right place.

Thanks in advance.
David

[l u k e]

http://smartflix.com/

There are a ton of metal working videos, just search the site for more, that link is just the page I had book marked.

This place rocks! I've rented from them quite a bit. I've never had a problem with late fees as I was afraid of at first.

They did send me the wrong video once, but straightened it out right away and credited me and sent the correct one out that day.

I'm currently watching "Introduction to lathes".

Enjoy.

[l u k e]

PS

The return is very simple, they supply very thing you need.