Anyone Know what this stepper is?

[saris]

Here's a pic, couldnt find any on searching, is it a stepper (think so) or a servo? Also what is the size & specs, uni/bipolar etc



thanks alot for any help

[keebler303]

does the shaft spin freely or does it feel like it has small notches? In a stepper you will feel ech step as you turn them. How many wires come out of it? If its a stepper 4 wires= bipolar, 6,8 wires= unipolar or bipolar, they can be wired either way.

BTW you should have posted this question here: http://www.cnczone.com/forums/stepper_motors_drives/

Matt

[saris]

Sorry for posting in the wrong area... will post better in the future.


i don't have the motor in hand, looks like 8 wires or at least 6 from this pic:



fairly sure there stepper since 'most' servo motors ive seen are cylindrical, but not all, but really want to know what size they are in in-oz


thanks

[Halfnutz]

I'm pretty sure it is a 200V AC servo. Whats wrong with the Sanyo website?
Try their support center:

http://www.sanyo-denki.com/techno/index.html

Or give them a call: Phone (734) 525-1806

[saris]

Thanks for the phone number, gave them a call but the model is outdated, ther digging up some info hopefully on it. They did give some info on it:

probably a stepper motor with an encoder
don't kow what size etc yet.

Wondering if this would work for a Seig X2 Cnc convert and Xylotek controllers?

What the heck is this stepper, is this kinda like a hybrid stepper/servo motor and can i use this with a standard gecko or xylotek controller board, and 24v dc 10A power supply?

thanks again

[saris]

The 3 motors are here if anyone's intersted:


http://cgi.ebay.com/3-matching-Sanyo...QQcmdZViewItem