10-11-2006, 03:42 PM
|
| | | Join Date: Oct 2006 Location: usa
Posts: 10
| |
 help with g-codes for a 5 spoke wheel | |
Hello, everybody
I'm new to the forum and to cnc milling. I have a sherline 5000 mill I am using for cutting clock wheels and spoking them. I set up codes for my rotary table and mill for cutting the teeth no problem. The spoking has been a different story. I hope to tap into everybody's knowledge out there to help. I hope someone could look at this and give me sample g-codes so I can see where I've been messing up. klclock@sbcglobal.net email me and I'll send diagram of the wheel.
Thank You,
Kevin Moore
Last edited by Kevin Moore; 10-15-2006 at 11:37 AM.
Reason: add diagram
|
Linear Mode
