Utility blades

[quadbob]

Anyone out there have a way to machine,grind or whatever, a standard utility blade? The print calls for the blade to be rectangular,so that means machining off the corners. EDM is not an option. The quantity is 100 pcs. Thanks.

[keebler303]

http://www.americancuttingedge.com/

any of these work?

Matt

[quadbob]

Thanks,but they need the standard utility blade shape made into a rectangle 30mm wide,so no angles on corners. I appreciate the response and will send the link to purchasing.

[Rustybolt]

Have a fixture made to hold the blade/s on a magnetic chuck for surface grinding. Grind one end and then flip the part over.