Share Your Files Part or Art - Page 18 - CNCzone.com-The Largest Machinist Community on the net!

jtj30 · #**205** 08-30-2006, 07:25 PM

I cut this out over the weekend. I cut it from 2 sided mirror.

drawbar · #**206** 08-30-2006, 08:26 PM

That eagle looks sweet in mirror. Did you use any glue to hold the glass pieces together?

Brian

Salty72 · #**207** 08-30-2006, 08:35 PM

IS there a web sight or program that creates this type of Cutting File??

That eagle looks absolutly stunning in the mirror

WELL DONE

automizer · #**208** 08-30-2006, 08:39 PM

thats amazing, but how do you to cut mirror

tobyaxis · #**209** 08-30-2006, 08:42 PM

You did a fantastic job on that Eagle. Are you going to sell these?

HayTay · #**210** 08-30-2006, 09:20 PM

Originally Posted by Salty72

IS there a web sight or program that creates this type of Cutting File??

That eagle looks absolutly stunning in the mirror

WELL DONE

Here's a link to the post with the EAGLE G-code file right here on "The Zone": http://www.cnczone.com/forums/showpo...82&postcount=8
And here's the post with the DXF file: http://www.cnczone.com/forums/showpo...2&postcount=22

Enjoy!!!

tobyaxis · #**211** 08-30-2006, 09:36 PM

Why thank you Hay Tay.

Have you found a new means of transportation yet? And did you ever find out what caused the Van to catch Fire?

Glad your still here

HayTay · #**212** 08-30-2006, 11:37 PM

Originally Posted by tobyaxis

Why thank you Hay Tay.

Not a problem, and you are quite welcome. Glad to be of service.

lakeside · #**213** 08-31-2006, 01:34 AM

nice job on the Eagle is it acrylic.
Just a note to everyone.I've to upgrade my PC so I'm dumping programs on to disk. That's why all file were pulled.

jtj30 · #**214** 09-01-2006, 08:19 AM

The material that I used was Polycarbonate(lexan) 2 sided hardcoated mirror. It was scrap that I had left over from a previous cut job. I did end up glueing the feathers on. The bit that I cut this with was a few thousandths to big so the pieces didn't fit real tight. I also cut the Raptor the same day. It was 8' from head to tail. I sat it outside the shop the next day and a guy driveing by stopped and bought it before I could get pictures. His offer was just tooo good to pass up.

Thanks for all your responses.

lakeside · #**215** 09-01-2006, 08:31 PM

here an update screen shot of my drawing I'm way pasted get carried away up to 48 meg now

tobyaxis · #**216** 09-01-2006, 10:25 PM

Cool pics Mike can you send some to me?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Currently Active Users Viewing This Thread: 34 (1 members and 33 guests)
‎cwebs