Share Your Files Part or Art

[kirkln]

Nice job wood chuck

[wooderson]

that will work great, thanks gwittlock, you saved me a lot of time.. what program do you use to do that??

[ClearCut1]

Hello all,

I am looking for a DXF for laser cutting of a fairy or tinkerbell

Anyone??

[landdesign]

someone asked earlier for a file on a rocking horse.... thought it would be a fun exercise to play with. so.... this is what I developed in my Rhino cad. it cuts out of less than 1/2 sheet of 3/4" ply and cuts on my machine in about 15 minutes. My grand on went nuts over it. when fitting together it only took a few smacks with a rubber hammer and everything seems pretty tight. I added a two screws on the underside so it cant come apart. have fun cutting. it would be fun to see what others do with this.

Erik

[landdesign]

Hello all,

I am looking for a DXF for laser cutting of a fairy or tinkerbell

Anyone??

try this fairy

Erik

[Maccarly]

someone asked earlier for a file on a rocking horse.... thought it would be a fun exercise to play with. so.... this is what I developed in my Rhino cad. it cuts out of less than 1/2 sheet of 3/4" ply and cuts on my machine in about 15 minutes. My grand on went nuts over it. when fitting together it only took a few smacks with a rubber hammer and everything seems pretty tight. I added a two screws on the underside so it cant come apart. have fun cutting. it would be fun to see what others do with this.

Erik

Thanks Erik
this is a great Files
this is my first Modell of a Rocking Horse

Horst

[landdesign]

looks great... and painted ta boot.... your a mad man...

erik

[Maccarly]

looks great... and painted ta boot.... your a mad man...

erik

That is another forms of Rocket Horse Scalirt can one it also for Kidis make refuge

[Switcher]

New DXF File ---> Design 35


.

[Switcher]

New DXF File ---> Design 36


.

[Switcher]

New DXF File ---> Design 37


.

[myxpykalix]

someone asked earlier for a file on a rocking horse.... thought it would be a fun exercise to play with. so.... this is what I developed in my Rhino cad. it cuts out of less than 1/2 sheet of 3/4" ply and cuts on my machine in about 15 minutes. My grand on went nuts over it. when fitting together it only took a few smacks with a rubber hammer and everything seems pretty tight. I added a two screws on the underside so it cant come apart. have fun cutting. it would be fun to see what others do with this.

Erik

Erik,
Looking at your dxf would the best way to make your rocking horse be to start out with a 4'x4' square, then take your individual pieces and size them to your specs, then nest them within the 4'x4'? thanks