Gaging Acme Threads

[widgitmaster]

I have been searching for an ACME 1/2-10 RH GO/NOGO plug gage, and have not been able to locate one! Not even in McMaster Carr or MSC!
The only thing I can find is Acme pitch gages!

Does anyone know where one can be found!

[ctate2000]

You may have to buy from a gage manufacturer. Will cost plenty. How close are you trying to work. You may be able to manufacture in house by buying a tap and making your oun gage. You could buy acme all thread and single point your own gage in lathe. The all thread being your master. These techniques will work if you are not working to very close tolerances.

[Wayne/GageCrib]

Originally Posted by widgitmaster Does anyone know where one can be found!

I know that by now you may have found the ACME gage, but for the benefit of others:

ACME Screw Thread Gages can be purchased from Gage Crib Worldwide Inc.

Gage Crib Worldwide Inc is an industrial distributor that specializes in thread measurement tools.
This request is a common one for Gage Crib Worldwide Inc.

I hope that I have helped.