Very small (0-80) drill/tap combo?

[arobustus]

Is there anyone who makes drill tap combinations (also known as "draps") down to 0-80? I can't tell you how easy it would make a certain part, if there is such an animal.
Thanx,
-plh

[Ken_Shea]

arobustus,
http://www.cchobbies.com/catalog/tools.htm

380-780Kadee 0-80 Tap & Drill Set $4.10


and others

Ken

[arobustus]

arobustus,
http://www.cchobbies.com/catalog/tools.htm

380-780Kadee 0-80 Tap & Drill Set $4.10


and others

Ken

Thank you, but I am talking about tools that are a tap drill and tap in one tool. I have seen them down to 6-32. They typically have a short length of drill followed by the tap. That way if you are hurting for tool positions, say like on earlier swiss type machines, you can combine drilling and tapping into one (precious) tool position.
-arobustus