| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| General Metalwork Discussion Discuss everything relating to metal work. |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
10-21-2005, 11:37 AM
| |||
| |||
I'd like to drive my new milling head with a timing belt. I'd like to transmit 1HP at about 7000 feet per minute. Can anyone here recommend the series and width I'd need. Thanks, Jerry  |
|
#2
10-21-2005, 11:57 AM
| ||||
| ||||
| I am using Goodyear 300H150 on a 2hp I converted from Vari-Speed pulley. Al.
__________________ CNC, Mechatronics Integration and Machine Design. “Logic will get you from A to B. Imagination will take you everywhere.” Albert E. |
|
#3
10-21-2005, 12:08 PM
| |||
| |||
| Thanks, I see that in the McMaster catalogue. What motor rpm and size pulleys are you using? I'm hoping that a lesser belt will work. Jerry |
|
#4
10-21-2005, 12:36 PM
| ||||
| ||||
| Around 3" diameter, 1:1 3300rpm spindle speed. Al.
__________________ CNC, Mechatronics Integration and Machine Design. “Logic will get you from A to B. Imagination will take you everywhere.” Albert E. |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
| | |
Linear Mode
