| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| General Metalwork Discussion Discuss everything relating to metal work. |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#13
 
07-13-2011, 09:02 PM
| ||||
| ||||
Cheap blade cost $10 at Home Depot Carbide 40 tooth, lubed it w/ WD40.. Cut like butter, shavings were fine hard to sweep ... but left a nice cut I'd do it again  |
|
#14
07-14-2011, 02:54 AM
| ||||
| ||||
| Best $30 you will spend for cutting aluminum From Bam Carbide. 10"D x 5/8"b x Z=80 x .110" kerf x TCG grind x -5 hook I have that blade and a standard carbide tipped one and both work on the chop say but the Bam is faster and cuts smoother. |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
| | |
Linear Mode
