Need Help!- Cannot find inserts for this holder. . .

[MarineMachinist]

I recently picked this up on Ebay for 0.99! Now I might know why LOL! I cant seem to find any parting inserts for it. Can any of you point me in a good direction. Kennametal doesn't list any on their site and Google comes up with only one other similar tool holder but nothing exact.

Thanks

Brad

[chuck5121]

you might want to give us the part number.

[Thawk53]

You are going to need a support blade & clamp along with the inserts.
For .125 wide part-off:
Insert: GS-125N-KC722 or GS-125L-KC722
Support Blade: SB-309-111
Clamp: CM-435-137

For .188 wide part-off:
Insert: GS-188N-KC722 or GS-188L-KC722
Support Blade: SB-309-105
Clamp: CM-435-106

[MarineMachinist]

Originally Posted by chuck5121 you might want to give us the part number.

It is stamped and shown in the photo, I figured you all were going to see that in the picture... anyways, here's the part number of the tool holder:

Kennametal KGSPL20UD

Brad

[MarineMachinist]

Originally Posted by Thawk53 You are going to need a support blade & clamp along with the inserts. For .125 wide part-off: Insert: GS-125N-KC722 or GS-125L-KC722 Support Blade: SB-309-111 Clamp: CM-435-137 For .188 wide part-off: Insert: GS-188N-KC722 or GS-188L-KC722 Support Blade: SB-309-105 Clamp: CM-435-106

Thanks Thawk, I appreciate the quick help!

Brad

[MarineMachinist]

Thawk,

Where did you find those part numbers? I must not have very good researching skills... I still couldn't find much on them. If you know who sells them, let me know.

Thanks!

[Thawk53]

Brad,
I found all the part numbers in Kennametal catalog #1010. The Kennametal website still offers the inserts but not the support blades or clamps. After taking a look at your picture again, it reminded me of a Manchester separator style toolholder. Went to the Widia/Manchester website and sure enough, it was in their catalog, but with a different part number.
The support blade & clamp numbers are the same without the first two letters Kennametal puts with them.

_______________________
Kennametal
For .125 wide part-off:
Insert: GS-125N-KC722 or GS-125L-KC722
Support Blade: SB-309-111
Clamp: CM-435-137
Manchester
Insert: 507-117-M40, 507-129-M40 or 507-154-M40
Support Blade: 309-111
Clamp: 435-137
_____________________________

For .188 wide part-off:
Insert: GS-188N-KC722 or GS-188L-KC722
Support Blade: SB-309-105
Clamp: CM-435-106
Manchester
Insert: 507-116-M40 or 507-125-M40
Support Blade: 309-105
Clamp: 435-106

Hope this helps.